Samsung SPH-M930ZKASPR - Manual (Page 94)

Web and Data 94
3. The following icons show your Wi-Fi connection status at a glance:
●
Wi-Fi is connected and active.
●
Wi-Fi active but there is a communication issue with the target Wireless Access
Point (WAP).
Note: If you want to remove the device’s wireless network settings, tap Forget on this window.
You need to enter the settings again if you want to connect to this wireless network.
Connect to a Different Wi-Fi Network
1. Press > and tap > Wireless & networks > Wi-Fi settings. Detected
Wi-Fi networks are displayed in the Wi-Fi networks section. To manually scan for
available Wi-Fi networks, on the Wi-Fi settings screen, press and tap Scan.
2. Tap another Wi-Fi network to connect to it.
Note: If the wireless network you want to connect to is not in the list of detected networks,
scroll down the screen, and tap Add Wi-Fi network. Enter the wireless network settings
and tap Save.
Data Services (Sprint 3G)
With your Sprint service, you are ready to start enjoying the advantages of data services. This
section will help you learn the basics of using your data services, including managing your user
name, launching a data connection, and navigating the Web with your device.
Important: Certain data services requests may require additional time to process. While
your device is loading the requested service, the touchscreen or QWERTY
keyboard may appear unresponsive when in fact they are functioning properly.
Allow the device some time to process your data usage request.
Your User Name
When you buy your device and sign up for service, you’re automatically assigned a user name,
which
is typically based on your name and a number, followed by ―@sprintpcs.com.‖ (For
example, the third John Smith to sign up for Sprint data services might have
[email protected] as his user name.)
When you use data services, your user name is submitted to identify you to the Nationwide
Sprint Network. Your user name is automatically programmed into your device. You don’t have
to enter it.