Samsung SGH-A817ZKAATT - Manual (Page 158)

154
• Settings: lists the settings for voice command software such as:
Confirmation, Adaptation, Audio Modes, Speakerphone, and About.
If the phone does not recognize your command, the Command
not recognized screen displays with two options:
• Help: provides instructions on how to use voice commands.
• Restart: touch and try the command options again.
Speak clearly when giving your command. There is no need to
speak slowly or with added emphasis. The voice recognition
software has been optimized to understand your speech in its
natural form. If it does not recognize your command after a few
seconds, a voice prompt asks you to “please try again”. If it does
not recognize your command again, the Command not
recognized screen displays “Try again?”. Say or touch Yes or No.
You must end your current Voice Commands call before you can
make another call using Voice Commands. To make a 3-way call,
only the first call can be made using Voice Commands.
Voice Recognition Tips
• Wait for the tone before you speak.
• Speak clearly and at a normal volume.
• There is no need to use paused speech. The voice recognition software
has been trained to recognize natural speech and performs best when
you speak naturally.
• In very noisy environments, it may be helpful to use a headset or a
Bluetooth headset.
Contacts List Voice Activation
On startup, Nuance Voice Recognition software reads your
Contacts list and voice-activates all the names.
When you add or change contacts, the software automatically
reloads and voice-activates the list.
Record Audio
Record Audio allows you to record voice memos. It also allows
you to send your audio clip to other people as an attachment of
an MMS message. Recording time varies based on the available
memory within the phone.
1. Touch ➔ Tools ➔ Record Audio.
For more information, refer to “Record Audio Settings” on
page 155.
2. To start recording, touch . Record a memo by speaking
into the microphone.
3. During the recording process, you can either touch Stop
( ) to stop and save the recording or Pause ( ) to
temporarily halt the recording. Once the audio recording
has stopped, the message is automatically saved.
Menu
a817 Blink.book Page 154 Monday, October 4, 2010 10:03 AM