Allied Telesis AT-WA1004G - Manual (Page 19)

AT-WA1004G User’s Guide
19
Physical Details
Front Panel
LEDs
Figure 2 Front Panel
Table 1 Front Panel LEDs
LED Status Description
Power ON Power has been applied to the unit.
OFF No power.
Status ON An error has been detected.
OFF The unit is operating in normal operation.
Blinking This LED blinks during start up and
firmware upgrade.
LAN
Link/ACT ON Corresponding LAN (hub) port is active.
OFF No active connection on the
corresponding LAN (hub) port.
Flashing Data is being transmitted or received via
the corresponding LAN (hub) port.
100 ON Corresponding LAN (hub) port is using
100Base-T.
OFF Corresponding LAN (hub) port connection
is using 10Base-T, or no active connection.