Camera, Call cost, Take and send – Samsung SGH-P107BSACIN User Manual
Page 42
Call Records
80
The following timers are available:
Last Call Time: the length of the last call.
Total Sent: the total length of all calls made since
the timer was last reset.
Total Received: the total length of all calls
received since the timer was last reset.
Reset Timers: the option used to reset the call
timers; you must first enter the phone password
(see page 122) and then press the OK soft key.
Call Cost
(Menu 3.6)
This feature lets you view the cost of call.
Depending on your SIM card, this menu option may
not be shown.
The following options are available:
Last Call Cost: the cost of the last call made.
Total Cost: the total cost of all calls made since
the cost counter was last reset. If the total cost
exceeds the maximum cost set in the Set Max
Cost option, you can no longer make any calls until
you reset the counter.
Max Cost: the maximum cost set in the Set Max
Cost option (see below).
Reset Counters: the option used to reset the cost
counter; you must first enter your PIN2 (see
page 124) and then press the OK soft key.
Set Max Cost: the option used to enter the
maximum cost that you authorise for your calls.
Price/Unit: the option used to set the cost of one
unit; this price per unit is applied when calculating
the cost of your calls.
81
Camera
Using the camera module built in your phone, you
can take pictures of people or events while on the
move. Additionally, you can send photos to other
people in a picture message or as an e-mail
attachment. The camera produces JPEG pictures.
Take and Send
(Menu 4.1)
This menu allows you to take a picture to send the
photo as a picture message to other destinations.
Note: When you take a picture in direct sunlight or
under too bright illumination, shading may
occur on the picture.
Taking a Picture to Send a Message
1. Accessing this menu turns on the camera at the
top centre of the phone.
You can see the picture to be captured on the
display.
2. Adjust the picture by rotating the camera
module.
Use the
and
keys to adjust the brightness
of the picture.