Health and safety information, Pin2, Puk2 – Samsung SGH-P107BSACIN User Manual

Page 65

Advertising
background image

Access Codes

124

PIN2

The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.

If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.

To change the PIN2, refer to page 94
(Menu 6.6.7).

PUK2

The 8-digit PUK2 (PIN Unblocking Key 2), supplied
with some SIM cards, is required to change a
disabled PIN2. If you lose the code, contact your
service provider.

To re-enable your PIN2:

1. Key in the PUK2 and press the OK soft key.

2. Enter a new PIN2 of your choice and press the

OK soft key.

3. When the Confirm PIN2 message is displayed,

key in the same code again and press the OK
soft key.

If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.

125

Health and Safety
Information

Exposure to Radio-Frequency
Energy (SAR Information)

Meet EU requirements concerning
exposure to radio waves

Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.

The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
the EU Council is 2.0W/kg.

*

* The SAR limit for mobile phones used by the public is 2.0

watts/kilogram (W/kg) averaged over ten grams of body
tissue. The limit incorporates a substantial margin of safety
to give additional protection for the public and to account for
any variations in measurements. The SAR values may vary
depending on national reporting requirements and the
network band.

Advertising