Samsung SGH-T699DABTMB - Manual (Page 237)

5. From the First time HotSpot configuration screen, tap
the Network SSID field and then create a new Network
SSID name.
6. Verify the Security field is set to WPA2 PSK.
7. Enter a new password then write it down.
8. Tap Save to store the new settings.
9. Confirm the Mobile AP service icon appears at
the top of the screen.
Note: By default, the connection is open and not secured. It is
recommended that you access the Mobile HotSpot
settings and create a secure connection by using a
password for communication.
Note: Using your Mobile HotSpot drains your device’s battery
much faster. The best way to keep using the device as a
HotSpot is by connecting to a Charger.
To connect to the HotSpot:
1. Enable Wi-Fi (wireless) functionality on your target
device (laptop, media device, etc.).
2. Scan for Wi-Fi networks from the external device and
select your device’s Mobile HotSpot name from the
network list.
• The SSID name for your device’s HotSpot is determined by
what you entered into the Network SSID field.
• You can change the name by tapping Configure ➔ Network
SSID and changing the entry.
3. Select this HotSpot and follow your on-screen
instructions to complete the connection.
4. Launch your Web browser to confirm you have an
Internet connection.
Connections 232