Samsung SGH-T699DABTMB - Manual (Page 255)

• Call accessories: allows you to assign headset settings during
incoming calls.
– Automatic answering configures the device to automatically
answer and incoming call when a headset is detected.
– Automatic answering timer configures the time delay before
the device automatically accepts the incoming call.
– Outgoing call conditions configures the connected Bluetooth
device to make outbound calls within one of two settings: Even
when device locked or Only when device unlocked.
• Extra volume on calls: activating this feature places an extra
volume button on your currently active call screen.
• Increase volume in pocket: increases the ringtone volume
when the device is in a pocket or a bag. Uses the proximity
sensor to detect its location.
• Call forwarding: configures call forwarding options.
• Wi-Fi Calling: allows you to access the Wi-Fi Calling settings.
• Additional settings: allows you to configure additional call
settings. For more information, refer to “Configuring
Additional Voice Call Settings” on page 254.
• Voicemail service: allows you to assign the service.
• Voicemail settings: displays the settings for the voicemail.
• Ringtone: assigns your device’s ringtone.
• Vibrate: configures the vibrate settings. Choose from Always,
Only in silent mode, or Never.
• TTY mode: allows you to configure the TTY settings. For more
information, refer to “TTY Mode” on page 257.
• Hearing aids: allows you to enable/disable hearing aid
compatibility. For more information, refer to “HAC Mode” on
page 257.
• Use Internet calling: allows you to configure the incoming call
and SIP account information.
Call rejection
1. From the main Call settings page, tap Call rejection.
2. Activate the feature by moving the Auto reject mode
slider to the right.
3. Tap Auto reject mode and tap one of the following
options:
• All numbers: to reject all calls.
• Auto reject numbers: to reject all calls in your Reject list.
Changing Your Settings 250