Samsung EV-NX30ZZBGBUS - Manual (Page 104)

103
Shooting Functions >
Flash
Adjusting the flash intensity
When the flash is on, adjust the flash intensity +/-2 levels.
To set the flash
intensity,
In Shooting mode, select [m] ĺ b ĺ Flash ĺ an
option ĺ [D] ĺ scroll the command dial or rotate the
navigation button or press [C/F] to adjust the flash
intensity.
Back Set Cancel
Flash : Fill in
•
You can also drag the slider or touch +/- to adjust the intensity.
•
Adjusting the flash intensity may not be effective when:
-
the subject is too close to the camera
-
you set a high ISO sensitivity
-
the exposure value is too big or too small
•
In some shooting modes, you cannot use this function.
•
If you attach an intensity-adjustable external flash to the camera, the intensity
settings of the flash will be applied.
•
If the subject is too close when you use the flash, some light may be blocked,
resulting in a dark photo. Ensure that the subject is within the recommended
range, which varies by lens.
•
When a lens hood is attached, the light from the flash can be blocked by the
hood. Remove the hood to use the flash.