Samsung SC-D5000-XAC - Manual (Page 71)

ENGLISH
Using the CAMCORDER - Advanced Recording
71 71
Audio Dubbing
✤ The AUDIO DUBBING function only works in PLAYER Mode.
✤ You can add sound to the original sound on a pre-recorded tape,
recorded in SP mode with 12bit sound.
✤ Use the internal and external microphones or other audio equipment.
✤ The original sound will not be erased.
Dubbing Sound
1. Set the device to CAMCORDER.
■ If you want to use an external microphone,
connect the microphone to the external
MIC input jack on the camcorder.
2. Set the power switch to PLAY mode.
■ If you want to use an external
microphone, connect the microphone
to the external MIC input jack on the
camcorder.
3. Press the (PLAY/STILL) button and
find the time frame of the scene to
be dubbed.
4. Press the (PLAY/STILL) button to
pause the scene.
5. Press the A.DUB button on the Remote Control.
■ A.DUB will be displayed on the LCD.
■ The camcorder is in a ready-to-dub state for dubbing.
6. Press the (PLAY/STILL) button to start dubbing.
■ Press the (STOP) button to stop the dubbing.
Notes
■ You can not use the audio dubbing function while playing a write
protected video tape.
■ When you wish to dub using the External A/V input, you must con-
nect the Multi-AV cable to the audio system from which you wish to
record.
■ You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode.
✤
✤
✤
✤
■
■
■
■
■
■
■
■
PHOTO
REW/RPS
A.DUB STOP SELF TIMER
SLOW
PLAY FF/FPS
STILL ZERO MEM.
FADE
S.SHOW
BLC
REV FWD
TAPE
MEMORY
PLAY
REC
OFF