Samsung SCH-A790ZKVXAR - Manual (Page 111)

s/w XA16 h/w A790.05 1/18/04 Settings 103
1. In standby mode, press the left soft key ( ) Menu ,
then press , . The profiles in the following
table appear in the display.
2. Use the navigation key to highlight the profile that you
wish to select or edit.
3. To select the highlighted profile for use, press .
4. To edit the highlighted profile, press the left soft key
(
) Edit . The sub menus in the following table
appear in the display.
Profile Function
Normal
The default profile. Ringtones, alerts, and other set-
tings are set to typical levels necessary for normal
operation.
Meeting
Ringtones and alarms are set to silent, or low-level
so that others aren’t disturbed.
Drive
Default settings for ringtones and alarms are set to
levels that will catch your attention while driving.
Outdoors
Default settings for ringtones and alarms are set to
the highest audible level.
Sub Menu Function
Volume/
Vibrate Set the volume level or vibrate setting for calls
and alarms.
Ringer Type Choose the ringer type for calls and data.
Key Beep
Set the volume, length, and tone type for when
keys are pressed for the selected profile.
Alerts
Turn alerts on or off for when you disconnect a
call, enter a roaming area, lose service, and
more for the selected profile.
Power On/Off
Turn the power on/off sound off or on for the
selected profile.
Roam Ringer
Turn the roam ringer on or off for the selected
profile.