Samsung SPH-M900ZKASPR - Manual (Page 103)

2E. Calendar & Tools 91
Calendar / T
o
ol
s
4. Follow the onscreen instructions.
Ⅲ These procedures walk you through the process
of connecting your device and updating the
firmware. See “Connecting Your Device to Your
Computer” on page 103.
Ⅲ You will now see a warning screen that data not
synchronized will be deleted. It is important to
back up your data before moving forward. See
“Backup your Data Prior to Update” on page 88.
Ⅲ When you are instructed to simultaneously press
and hold the
Volume Down , Camera and End keys
(download mode), it is important that you press
the
button LAST , as this makes sure the
phone does not turn on before the other two
buttons are pressed. If you see the Samsung logo
when you do this, you will need to remove and
replace the battery, and try it again.
5. Once the Flash Programming is complete, click
OK . Your Moment will reboot and start hands-free
activation.
Confirm the New Device Firmware
1. Press > and tap >
About phone .
2. Scroll to the bottom of the page and locate the
Baseband version read-only field.
3. Confirm the version is now updated.
For additional FAQs on the Moment, visit:
www.sprint.com/support .
– or –
Samsung Moment FAQs .
SPH-M900.book Page 91 Tuesday, March 2, 2010 10:27 AM