Samsung SPH-A680SSAQST - Manual (Page 147)

Section 3B: Sprint PCS Vision 139
Net Guard
When you first connect to the Web, the Net Guard will appear to
confirm that you want to connect. This feature helps you avoid
accidental connections. You can disable the Net Guard in the future
by selecting Always Auto-Connect when the Net Guard is displayed.
To change your Net Guard settings:
1. Press for Settings.
2. Press for PCS Vision.
3. Press for Net Guard.
4. Press the navigation key up or down to select On or Off.
5. Press to Save.
Sprint PCS Vision Connection Status and Indicators
Your phone's display lets you know the current status of your
connection through indicators which appear at the top of the
screen. The following symbols are used:
Your Sprint PCS Vision connection is active (data is being
transferred); the transmit/receive symbol will blink to indicate
data transmission. Incoming voice calls go directly to voicemail;
outgoing voice calls can be made, but the connection will
terminate.
Your Sprint PCS Vision connection is dormant (no data is being
sent or received). Though not currently active, when dormant
the phone can restart an active connection quickly; voice calls
can be made and received.
Your phone is not currently able to access Sprint PCS Vision
service features.
If no indicator appears, your phone does not have a current
Sprint PCS Vision connection. To launch a connection, see
“Launching a Sprint PCS Vision Connection” on page 138.
Note: When enabled, the Net Guard appears only once per session. The Net Guard
does not appear if the phone is merely re-connecting due to a time-out.