Samsung SPH-A680SSAQST - Manual (Page 35)

Section 2A: Your Phone - The Basics 27
Using One-Touch/Two-Touch/Three-Touch
Speed Dialing
You can store up to three hundred numbers in your phone’s speed
dial memory to make contacting friends and family as easy as
pressing a few buttons. With this feature, you can dial Speed Dial
entries using one key press for locations 1-9, two key presses for
locations 10-99, and three key presses for 100-300.
To use One-Touch Dialing for Speed Dial locations 1-9:
ᮣ Press and hold the appropriate key for approximately two
seconds. (The display confirms that the number has been
dialed when it shows “Calling...”.)
To use Two-Touch Dialing for Speed Dial locations 10-99:
1. Press the first digit.
2. Press and hold the second digit for approximately two seconds.
(The display confirms that the number has been dialed when it
shows “Calling...”.)
To use Three-Touch Dialing for Speed Dial locations 100-300:
1. Press the first digit.
2. Press the second digit.
3. Press and hold the third digit for approximately two seconds.
(The display confirms that the number has been dialed when it
shows “Calling...”.)
Note: If the desired entry contains more than one phone number, scroll left
or right to display the number you wish to call and press TALK to make
the call.
Note: Speed dialing is not available when you are roaming; when you are
roaming off the network provided to you, you must always dial using
eleven digits (1 + area code + number).