Samsung SCH-U810GNAVZW - Manual (Page 100)

97
• Restore Phone: All settings are reset to factory default settings
and all user data is erased including pictures, videos, music,
messages, contacts, and downloaded applications stored on the
phone.
Edit Codes
The default lock code is the last four digits of your phone number.
Use Edit Code to change the code to a lock code of your choice.
1. From the home screen, press MENU.
2. Press the Directional key to highlight Settings
& Tools and press .
3. Press Phone Settings.
4. Press Phone Security. You’re prompted to enter the
lock code. The default lock code is the last four digits of
your telephone number.
5. Enter the Lock Code and press . Several security
menus appear in the display.
6. Press Edit Codes. The following options display:
• Phone Only: Allows you to edit the lock code for only the handset.
• Calls & Services: Allows you to edit the lock code for all Calls &
Services.
7. Highlight an option and press . At the “ENTER NEW
CODE” prompt, enter the new lock code and press . At
the prompt, confirm new lock code.
8. At the “RE-ENTER NEW CODE” prompt, re-enter lock code
and press .
“PHONE ONLY CODE SET” or “CALLS & SERVICES CODE SET”
message appears in display confirming your lock code changed.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Restrictions
1. From the home screen, press MENU.
2. Press the Directional key to highlight Settings
& Tools and press .
3. Press Phone Settings.
4. Press Phone Security. You’re prompted to enter
the lock code. The default lock code is the last four digits
of your telephone number.
5. Enter the Lock Code and press . Several security
menus appear in the display.
u810.book Page 97 Friday, May 1, 2009 12:03 PM