Samsung SCH-U810GNAVZW - Manual (Page 32)

29
ᮣ For CDMA Settings:
3. Press CDMA Settings.
4. Press the directional key up or down to choose Home Only
or Automatic and press .
ᮣ For GSM Settings:
5. Press GSM Settings.
6. Press the directional key up or down to choose Automatic
or Manual, and press .
Voice Commands
Voice Commands is advanced speech recognition software that
can be used to activate a wide variety of functions on your phone.
Voice Commands software automatically voice activates all
contacts for voice dialing and searching, no pre-recording or
training needed. Speak phone numbers naturally to dial, and use
voice commands to navigate phone menus.
Voice Commands Settings
You can adjust the settings and preferences by opening Voice
Commands menu. Using this menu, you can change the
following Voice Command features:
1. From the home screen, press the Voice Commands key
. The Voice Commands screen displays.
2. Press the right soft key Settings.The following
options appear in the display:
• Digit Dial Readout: Reads out the numbers pressed when dialing
a phone number.
• Menu Readout: Reads out the menu items as you scroll through
them.
• TXT Msg Readout: Reads out the text in a TXT message.
Note: Picture or Video messages cannot be read back to you.
• Choice List: If Voice Commands is not absolutely confident that it
has correctly identified a name or number, it can display a choice
list of up to three possibilities, and prompt you to confirm the
correct one. You can control when choice lists appear by changing
the Choice Lists setting to the following:
– Automatic : Voice Commands displays a choice list when it is not
confident it has identified the correct choice from among multiple
alternatives.
u810.book Page 29 Friday, May 1, 2009 12:03 PM