Samsung SPH-M360ZKASPR - Manual (Page 33)

2A. Phone Basics 23
Phone Bas
ics
To place a call using Contacts Match Abbreviated Dialing:
1. Enter the last four or five digits of a Contact entry’s
phone number.
The contact number matching the entered digits
displays at the bottom of the screen.
2. Highlight the contact and press . (If there is
more than one matched number in your Contacts,
highlight a name and then press
to place a
call.)
3. Press to call the displayed number.
To place a call using Prepend Abbreviated Dialing:
1. Enter the last four to six digits of a Contact entry’s
phone number.
The contact number matching the entered digits
displays at the bottom of the screen.
2. Highlight the contact and press . (If there is
more than one matched number in your Contacts,
highlight a name and then press
to place a
call.)
Dialing From the Contacts List
1. Press > Contacts .
2. Highlight the entry you want to call and press
to dial the entry’s default phone number.
– or –
To dial another number from the entry, highlight
the name and press
, and then highlight a
number and press .
Speed Dialing
You can store up to 98 numbers in your phone’s speed
dial memory. Dial speed dial entries using one
keypress for locations 2–9 or two key presses for
locations 10–99.
To use One-Touch Dialing for speed dial locations 2–9:
ᮣ Press and hold the appropriate key for
approximately two seconds. The display confirms
that you have dialed the number when it shows
“connecting...”.
Tip: You can also view the contact details or enter a pause by
pressing
OPTIONS (right softkey) and the appropriate
choice after step 1 above.
Shortcut: From standby mode, press Contacts (right softkey)
to list entries.