Operation, Plug & play feature – Samsung LNS5296DX-XAA User Manual
Page 17
English-15
Turning the TV On and Off
Press the POWER
button on the remote control.
You can also use the
button on the front of the panel.
Plug & Play Feature
When the TV is initially powered on, two basic settings proceed automatically and subsequently:
1
Press the
POWER
button on the remote control.
The message “Shop Mode, Menu language, Channels
and Time will be set.” is displayed.
Press the ENTER button, then “Select the Home Mode
when installing this TV at home” menu is automatically
displayed.
3
Press the
or
button to select language, then
the
ENTER button.
“Select the antennas to memorize” menu is
automatically displayed.
4
Press the
or
button to memorize the channels of
the selected connection.
Press the
ENTER button to select “Start”.
2
Press the
or
buttons to select “Shop” or “Home”,
then the
ENTER button.
Then “Select the language of the OSD” the menu is
automatically displayed.
Operation
If the antenna is connected to ANT 1(AIR), select “Air” and if it is
connected to ANT 2 (CABLE), select “Cable”.
If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select “Air + Cable”.
In Cable mode, you can select the correct signal source among STD,
HRC, and IRC by pressing the
or
button, then press the
ENTER button.
Contact your local cable company to identify the type of cable system
that exists in your particular area.
continued...
We recommend setting the TV to Home mode for the best picture in your
home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop Mode, press and hold the
MENU
button on the side panel of the TV for five seconds to return to Dynamic
(Home) mode.
BN68-01047X-00Eng.qxd 8/29/06 2:00 PM Page 15