Altec Lansing A7 - Manual (Page 5)

A 7 O w n e r ’ s M a n u a l ■ 3
c o m p o n e n t s
The following components are contained in the A7 loudspeaker's
shipping container.
C A B I N E T — M O D E L 8 2 8
This A7 Loudspeaker cabinet is hand made from
13 layer Baltic Birch and covered with a durable
black splatter finish.
The prime reason for an enclosure or baffle is to
separate the sound radiated from the rear of a
low frequency loudspeaker diaphragm or cone
so that it does not cancel the radiation
generated by the front of the cone. The
enclosure is designed as a component of an
acoustical system. A properly designed cabinet
cannot make a poorly designed loudspeaker
operate satisfactorily, nor can a well designed
loudspeaker perform efficiently when housed in
an inferior enclosure.
LOW FREQUENCY WOOFER - 15” MODEL 515.
HIGH FREQUENCY COMPRESSION DRIVER - MODEL 902.
HIGH FREQUENCY SECTORAL HORN - MODEL 511B
90° X 40° Sectoral Horn.
NETWORK - MODEL N-900A.
BINDING POSTS - CARDAS ACBP-S
Two pair. Non-magnetic, billet Brass, short binding post, Rhodium over Silver
plate. Billet brass nut, Gold plate. Glass filled nylon insulator. We ship the A7
jumpered for mono wiring. Simply remove the jumpers for bi-amplification.
Binding posts accept either _” spades or banana plugs.
MANUAL
This document which contains product use and warranty information.