Samsung SMT-T5040 - Manual (Page 25)

GB-3
SMT-T5040
GB
SAFETY INSTRUCTIONS
GB-2 D I G I T A L T E R R E S T R I A L R E C E I V E R
SMT-T5040
This STB has been manufactured to satisfy international safety standards.
Please read the following recommended safety precautions carefully.
MAINS SUPPLY: AC 220-240V~, 50/60Hz
OVERLOADING: Do not overload wall outlets, extension cords or adapters as this
can result in fire or electrical shock.
LIQUIDS: Keep liquids away from the STB. Apparatus shall not be exposed to
dropping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
CLEANING: Before cleaning, disconnect the STB from the wall socket.
Use a cloth lightly dampened with water(no solvents) to clean the
exterior.
VENTILATION: Do not block the STB ventilation holes. Ensure that free airflow is
maintained around the STB. Never store the STB where it is exposed
to direct sunlight or near heating equipment e.g. a radiator.
Never stack other electronic equipment on top of the STB.
Place the STB at least 30mm from the wall. Need at least 10mm from
the top and both side of the STB for ventilation.
ATTACHMENTS: Do not use any attachment that is not recommended by the
manufacturer; it may cause a hazard or damage the equipment.
CONNECTION TO THE CABLE TV SIGNAL AND TV:
Connect all components before plugging any power cords into the
wall outlet. Always turn off the STB, TV and other components before
you connect or disconnect any cables.
SERVICING: Do not attempt to service this product yourself.
Any attempt to do so will make the warranty invalid.
Refer all servicing to a qualified service agent.
LIGHTNING: If the STB is installed in an area subject to intense lightning activity,
protection devices for the STB mains connector and modem telephone
line are essential. The individual manufacturer’s instruction for
safeguarding other equipment, such as TV set, Hi-Fi, etc., connected
to the STB must also be followed during lightning storms.
GROUNDING: Terrestrial cable MUST BE EARTHED. The grounding system must
comply with SABS 061.
WARNING!
1. Follow these directions in order not to damage the power cord or plug.
Do not modify or process the power cord, power supply unit or plug arbitrarily.
Do not bend or twist the power cord too much.
Make sure to disconnect the power cord with holding the plug.
Separate heat appliances from the power cord as distance as possible in order to
prevent the cover from being melted.
2. Failure to follow one of them may cause electrical shock.
Do not open the main body.
Do not insert metals or inflammable objects inside the product.
Do not touch the power plug with a wet hand.
Disconnect the power cord in case of lightning.
Do not cover the receiver’s ventilation openings with items such as newspapers,
clothes etc.
Do not place the receiver on top of household appliances that emit heat.
3. Do not use the product when it is out of order. If you continue to use the product
with a defect, it can cause a serious damage to the product. Make sure to contact
your local product distributor when the product is out of order.
4. The Mains plug is used as a disconnect device and shall stay readily operable at
any time. To disconnect the apparatus from the AV mains, the plug must be pulled
out from the mains socket, therefore the mains plug shall be readily operable.
T5040_Eng 04/03/2010 Page 2-3