Samsung SMT-T5040 - Manual (Page 34)

GB-21
SMT-T5040
GB
OPERATING THE RECEIVER
GB-20 D I G I T A L T E R R E S T R I A L R E C E I V E R
SMT-T5040
OPERATING THE RECEIVER
T5040_Eng 04/06/2010 Page 20-21
4.2 Press the PREFERENCE of the sub menu
topics.
The preference menu will be displayed. For the preference-
menus: Parental Rating, Banner Duration, Change PIN
Code, Channel Change Mode, Application Auto Start,
Subtitle, Use LCN.
4.2.1 Parental Rating
Parental Rating protects your children from adult content,
select the first option of Preference, “ Parental Rating”.
Use the / / / keys to select age for your youngest
child then select SAVE and press the OK key for confirma-
tion.
All services which age grades are equal or greater than
set will be blocked and request to enter the PIN Code.
If you want to deactivate, select “No Limit”.
By default, Activation is “On” and selected Limit age is
“Over 18 years old”.
Please enter the PIN Code.
This banner is shown if service which age grade is greater
than set in Parental Control menu. Enter four digits PIN
Code to hide this banner and show service content.
Factory PIN Code is 0000, and you can change it in
Change PIN Code menu.
4-2-2 Banner Duration
You can set the display (banner) time, select the second
option of Preference, “ Banner Duration”.
Set the display duration of the information (banner) box
displayed in the screen. The time ranges from 0 to 15
seconds.
4-2-3 Change PIN Code
To change the PIN Code, select the third option of Prefer-
ence, “ Change PIN Code”.
This will take you to the following menu:
In this option, you need to enter the current PIN Code at the
first cursor, and at the second cursor enter the desired PIN
Code. To confirm, you need to enter the new PIN Code
again. Please remember the PIN Code should be a 4 digit
numerical value.
THE FACTORY PRESET PIN CODE : 0 0 0 0.
If you forget the PIN Code, contact your dealer or
service provider. Once you change password, please
do not forget and keep well.
4-2-4 Channel Change Mode
If you want to change the display mode of channel, please
follow the instruction below.
Select All TV or All Radio or Favorite Group with the
/ keys.
Select SAVE and press “ OK” for confirmation.
4-2-5 Application Auto-start
If you want to change the display mode of MHP application,
please follow the instruction below.
Select On or Off in Application Auto-start mode with the
/ keys.
Select SAVE and press “
OK” for confirmation.
Exit without OK key makes MHP App Control
unchanged.
:
: