Sj-12t technical specifications – Ampeg SJ-12T User Manual
Page 12
Ampeg is proudly Made in America.
A product of SLM Electronics, 1400 Ferguson Avenue, St. Louis, MO 63133 U.S.A.
SJ-12T TECHNICAL SPECIFICATIONS:
OUTPUT POWER RATING
50 Watts RMS @ 5 % THD 8 ohm load 120 VAC
SIGNAL TO NOISE RATIO
70dB Typical
GAIN
62 dB
TONE
30 dB Boost and Cut @ 4 kHz
SPEAKER SPECS
12”, 50 w, 8 ohm, 1.5” voice coil diameter, 34 oz. magnet
POWER REQUIREMENTS
120 VAC, 60 Hz, 110VA
100/115 VAC, 50/60Hz, 110VA
230 VAC, 50/60Hz, 110VA
SIZE AND WEIGHT
21” W x 17” H x 10.25” D
40 lbs.
Ampeg continually develops new products, as well as improves existing ones. For this reason,
the specifications and information in this manual are subject to change without notice.
Ampeg continuamente desarrolla nuevos productos, así como también mejora los existentes. Por esta razón,
las especifaciones é información incluidos en este manual están sujetos a cambios sin previo aviso.
Ampeg développe continuellement des nouvels produits, ainsi d'améliorer ceux qui existe. Pour cette
raison les spécifications et les informations dans ce manuel peuvent se changer sans préavis.
P/N 47-277-12 • 06/09/03