Autostart AS-1291 User Manual

Page 6

Advertising
background image

P. 6

User Guide

• To arm the Starter Kill in Active or Passive Mode, press and hold button Ι on the

transmitter. The parking lights will flash once. (If Remote Door Locks were installed, this

will also lock the doors). In Passive Mode, the system will automatically arm 1 or 3 minutes

after the engine is shut down.

Remote Door Locks

Note: Can only be activated if button

Ι is programmed as

LOCK

or

UNLOCK

button.

If your system was installed with the Remote Door Locks option, you will have the

convenience of remote keyless entry.
To

LOCK

your doors and

ARM

the Starter Kill:

1. Press and hold button

Ι for approx. 1 sec.

2. The parking lights will flash once and the L.E.D. will flash slowly to confirm that the

doors have been locked and that the Starter Kill feature is enabled if it was

installed.

To

UNLOCK

your doors and

DISARM

the Starter Kill:

1. Press and hold button

Ι for approx. 1 sec.

2. The parking lights will flash twice and the L.E.D. will go out to confirm that the

doors have been unlocked and that the Starter Kill feature is disarmed if it was

installed.

Note: If installed and configured in Passive Mode at installation, the Starter Kill feature will

rearm automatically 60 seconds after the doors are unlocked. For that reason, you may

have to unlock your doors a second time if some time elapses before you actually start

the engine.

Ignition-controlled Door Locks Option

This is an added security feature. If your system was installed with the Ignition-controlled

Door Locks option, the doors will automatically be locked as soon as the user presses the

brakes while the ignition key is in the

IGNITION ON (RUN)

position.

When the key is turned to the Ignition

OFF

position, the doors will automatically be unlocked.

(Only available if remote Door Lock Option is installed)
Secure Lock Option

Before it can remote-start your vehicle, the module must first disarm the factory security

system.

The Secure Lock feature may be required on certain vehicle models with factory security

systems that automatically unlock the doors when the security system is disarmed.

To keep your vehicle protected when the factory security system is disarmed for a remote

start, Secure Lock will relock your doors as soon as the vehicle has started.

Once the engine run cycle ends, Secure Lock will rearm your factory security system.
Remote Trunk Release Option

If your system was installed with the remote trunk release, you can open your trunk by

pressing buttons

Ι & ΙΙ simultaneously on the remote transmitter. Vehicles must have an

electric trunk switch or a remote trunk button on the vehicle’s OEM transmitter for this option

to be compatible with the module.
Starter Kill / Anti-Grind

This added security feature will immobilize your vehicle when the system is armed

(LOCKED). If your Module was installed with the Starter Kill option, you will not be able to

start your vehicle with the key unless the system has been disarmed first (UNLOCKED).
The Starter Kill option can be programmed to be

ACTIVE

(will not arm automatically) or

PASSIVE

(will arm automatically). In

PASSIVE

Mode, your installer can program it to arm automatically in

1 minute. Note that in Mode 1- Function 3- Option 3, pressing button

Ι will always give an

Advertising