Advanced features – Samsung LE46D679M3S User Manual
Page 38
38
English
Advanced Features
¦
Setting Up Anynet
+
■
Setup
Anynet
+
(HDMI-CEC) (Off / On): To use the Anynet
+
Function, Anynet
+
(HDMI-CEC) must be set to On.
✎
When the Anynet
+
(HDMI-CEC) function is disabled, all the Anynet
+
related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet
+
Device to turn off automatically when the TV is turned off.
✎
If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off.
✎
May not be enabled depending on the device.
¦
Switching between Anynet
+
Devices
1. Anynet
+
devices connected to the TV are listed.
✎
If you cannot find a device you want, press the red button to refresh the list.
2. Select a device and press the
ENTER
E button. You can switch to the selected device.
✎
Only when you set Anynet
+
(HDMI-CEC) to On in the Application menu, the Device List menu appears.
x
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
x
If you have selected external input mode by pressing the
SOURCE
button, you cannot use the Anynet
+
function.
Make sure to switch to an Anynet
+
device by using the Device List.
[LD679-ZG]BN68-03378A-L04.indb 38
2011-04-12 �� 10:23:25