Troubleshooting solución de problemas, English español – Samsung VP-X110L User Manual

Page 128

Advertising
background image

128

128

ENGLISH

ESPAÑOL

Troubleshooting

Solución de problemas

✤ If these instructions do not solve your problem, contact your nearest Samsung

dealer or authorized service centre/personnel.

✤ Si las siguientes instrucciones no le permiten solucionar el problema, póngase

en contacto con el distribuidor más cercano o con el centro de servicio técnico o
personal autorizado de Samsung.

The power is not connected properly
The battery is dead
The battery is too cold

The Date/Time is not set

Symptom

Possible Causes

Measure

Connect the AC adapter properly,
page 24
Replace the dead battery pack
Warm up the battery or move to
warmer place

Set the Date/Time, pages 90~91

Not enough free space for
saving files

The file is corrupted

The paper is insufficient.

The paper is caught in the
printer.

Ink is low.

The file is wrong.

The error is occurred while
transferring data.

Battery is low.

The hold key is locked.

The memory card is
corrupted.

Format the memory card.

Failed to write.

Failed to read.

The format is not
supported.

Memory Stick is protected
to write.

The video file is corrupted.

Not enough free
space

Corrupted file

Paper error

Printer error

Ink error

Wrong error

USB transfer error

Low battery

Holding the key

Card error

Not formatted

Write error

Read error

Not supported
format

Write protected

MPEG decoding
error

Check the space of internal memory or the Memory
Stick.

Delete the corrupted file.

Check the paper in the printer.
If there is no paper, insert the paper.

Check that paper is caught in the printer. Pull out the
caught paper.

Check if the ink or toner is low.

Check that the file is JPEG.

Disconnect the USB cable and connect it again.

Charge the battery pack or connect the AC Adapter.

Unlock the hold key and operate the CAM.

Format the Memory Stick or replace it with new one.

Format the Memory Stick.

Check the memory space or format the memory.

Delete the file.

The AVI or JPEG file that is not supported.
Check the supported file on the page 30.

Unlock the Memory Stick.

Delete the corrupted file.

Display

Informs that…

Action

No power is supplied

Date/Time is wrong

Self Diagnosis Display

Pantalla de autodiagnósticos

No hay espacio suficiente
para guardar archivos.

El archivo está dañado.

Papel insuficiente.

Papel atascado en la
impresora.

Tinta baja.

El archivo es erróneo.

El error se produce al
transferir datos.

Batería baja.

Tecla Hold bloqueada.

La tarjeta de memoria está
dañada.

La tarjeta de memoria
necesita formato.

Fallo al escribir.

Fallo al leer.

Formato no admitido.

El Memory Stick está
protegido contra escritura.

El archivo de vídeo está
dañado.

Not enough free
space

Corrupted file

Paper error

Printer error

Ink error

Wrong error

USB transfer
error

Low battery

Holding the key

Card error

Not formatted

Write error

Read error

Not supported
format

Write protected

MPEG decoding
error

Compruebe el espacio de la memoria interna o del
Memory Stick.

Borre el archivo dañado.

Compruebe el papel en la impresora. SI no hay papel,
inserte papel.

Compruebe si el papel se ha atascado en la impresora.
Retire el papel atascado.

Compruebe si la tinta o el tóner está bajo.

Compruebe que el archivo sea JPEG.

Desconecte el cable USB y conéctelo de nuevo.

Cargue la batería o conecte el adaptador de CA.

Desbloquee la tecla Hold y utilice la VIDEOCÁMARA.

Dé formato al Memory Stick o cámbielo por uno nuevo.

Dé formato al Memory Stick.

Compruebe el espacio en memoria o dé formato a la
memoria.

Borre el archivo.

No se admite el archivo AVI o JPEG.
Compruebe los archivos admitidos en la página 30.

Desbloquee el Memory Stick.

Borre el archivo dañado.

Pantalla

Indica que...

Solución

La alimentación no se ha conectado
correctamente.
La batería está muerta.
La batería es demasiado fría.

No se ha fijado Date/Time <Fecha/Hora>.

Síntoma

Posibles causas

Medida

Conecte correctamente el
adaptador de CA, página 24
Sustituya la batería muerta.
Caliente la batería o trasládese a un
lugar más cálido.

Defina Date/Time <Fecha y hora>,
páginas 90 y 91

No se suministra
alimentación.

La fecha y la hora son
erróneos.

00876J X105 UK+ESP~135 6/10/05 1:56 PM Page 128

Advertising