AT&T 2256 - Manual (Page 7)

3 Install the handset battery.
Use only AT&T Battery 3301, SKU# 91076.
4 Charge the handset battery.
•
Place the handset in the base.
• Charge the battery at least 12 hours. After the first charge,
the battery will charge in eight hours.
5 Check for dial tone.
•
After the batteries are ch a rge d , lift the handset and pre s s
; you should hear a dial tone.
4
b) Plug the battery pack
connector into handset.
Place the battery pack and
wires in the compartment.
a) Remove battery
compartment cover by
pressing on indentation
and sliding downward.
c ) Replace cover by
sliding it on its
t ra ck up over
b a t t e ry case until
it snaps fi rm ly
into place.