Allied Telesis AT-x230-18GP - Manual (Page 70)

Chapter 2: Installation
60
3. Position the SFP transceiver with the label facing up.
4. Gently slide the transceiver into the SFP slot until it clicks into place as
shown in Figure 30.
F IGURE 30. I NSERTING AN SFP TRANSCEIVER INTO AN SFP SLOT
SFP
5. Verify that the handle on the transceiver is in the upright position, as
shown in Figure 31. This secures the transceiver and prevents it from
being dislodged from the slot.
F IGURE 31. P OSITIONING THE SFP HANDLE IN THE UPRIGHT POSITION
SFP
SFP Transceiver
Handle