Allied Telesis AT-TQ Series - Manual (Page 110)

Chapter 4: Cluster Menu
110
2. To start the automatic channel assignments feature, click the Start
button. The window displays new options, shown in Figure 33.
Figure 33. Automatically Manage Channel Assignments Window -
Automatic Channel Assignment Enabled
3. Configure the two parameters in the Advanced section of the window.
The parameters are defined in Table 14 on page 111.
Table 13. Current Channel Assignments
Column Description
IP Address Displays the IP address of the access
point.
Radio Displays the MAC address of the radio.
Band Displays the radio band that the access
point is broadcasting on.
Channel Displays the current channel of the radio.
Status Displays the status of the radio. The radio
has the status Up when it is enabled and
Down when it is disabled. To change the
status of the radio, refer to “Configuring
the Radio Settings” on page 46 or
“Configuring Basic Radio Settings” on
page 43.