Delete a trap host table entry – Allied Telesis AT-GS950/8 User Manual
Page 221
Advertising

AT-GS950/8 Web Interface User Guide
221
Delete a Trap
Host Table Entry
Use the following procedure to delete a Host table entry:
1. From the main menu on the left side of the page, select the SNMP
folder.
The SNMP folder expands.
2. From the SNMP folder, select Trap Management.
3. The Trap Management Page is displayed. See Figure 81 on page 219.
4. To delete an entry in the host table, click Delete next to the entry in the
table that you want to remove.
The Host table entry is removed from the table. No confirmation
message is displayed.
5. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.
Advertising