Allied Telesis AR750S-DP Secure VPN Router - Manual (Page 17)

AR750S-DP Secure VPN Router
16
• To connect via a LAN, use an Ethernet cable to connect the router’s
switch port(s) to the device(s) on the LAN. Select the LAN PC from
which you wish to configure the router. The PC should be in the same
subnet as the part of the LAN that contains the router (for example, the
PC could be connected to a hub or Layer 2 switch that is directly
connected to one of the router’s switch ports).
2. Assign the PC an IP address in the same subnet as the router.
The router’s default IP address is 192.168.1.1, and the default subnet mask is
255.255.255.0.
3. Browse to the GUI.
If you access the Internet through a proxy server, set your browser to
bypass the proxy for 192.168.1.1. Point your web browser at 192.168.1.1.
4. Log in and set the password.
At the login prompt, enter the login name and password. Passwords are case
sensitive.
User Name: manager
Password: friend
The system status page appears and you can now use the GUI to configure
the router.
Important To ensure configuration settings are saved correctly, use the
GUI menus and buttons to navigate, not your browser’s buttons.
3 4 2 1
10BASE-T/100BASE-TX SWITCH PORTS
POWER
ON
OFF
AR750S-DP Router
PC
Switch Ports
750S-DP_Hub
Hub or Layer 2 Switch
RESET PSU 1
PSU 2
0
1
1
2
3 5 ASYN0 PIC BAYS PIC0
PIC1
4
SYS
ETHERNET STATUS
0 1
L/A
D/C 1 2 3 4 5 0
1 SWITCH PORTS PIC
ETHERNET CONSOLE SWITCH PORTS
L/A
D/C
AR750S-DP Secure VPN Router