Allied Telesis x610 Series Layer 3 - Manual (Page 95)

RPS
READ
Y
STACKING
risk of
rvicing
AT-LX44CPUCVR AT-x6EM/X
S2
1
2 L/A
L/A
POWER
SFP+
SFP+ CLASS 1 LASER P RODUCT
10G LI NK ACT
L/A
RPS
READ Y
STACKING
risk of
rvicing
AT-LX44
CPUCVR
AT-x6EM/X
S2
1
2 L/A
L/A
POWER
SFP+
SFP+ CLASS 1 LASER P RODUCT
10G L INK
ACT
L/A
x610 Series Layer 3 Gigabit Ethernet Switches Installation Guide
95
5. Verify that the handle on the SFP+ transceiver is in the upright
position, as shown in Figure 66, to prevent inadvertently removing the
transceiver.
Figure 66. Positioning the SFP+ Transceiver Locking Handle
6. Remove the dust plug from the SFP+ transceiver, as shown in
Figure 67.
Figure 67. Removing the Dust Plug from an SFP+ Transceiver
7. Connect a cable to the SFP+ transceiver, as shown in Figure 68. For
SFP+ optical and cabling specifications, consult the documentation
shipped with the module.