Allied Telesis AT-GS950/8 - Manual (Page 261)

AT-GS950/8 Web Interface User Guide
261
For more information, see “System Management Information” on
page 38
System Description - This parameter describes the switch’s title
that is advertised. You cannot change this parameter.
Port States
Each port on the switch can be assigned a LLDP states as follows:
1. Refer to the lower section of Figure 93 on page 259 for the LLDP port
states.
2. In the State column, select one of the following states from a specific
port’s pull-down menu:
Disabled - LLDP is disabled on the port. The port can not receive
or transmit LLDP data packets.
Enabled - LLDP is enabled on the port. The port can receive and
transmit LLDP data packets.
RxOnly - LLDP is enabled on the port. The port can receive LLDP
data packets.
TxOnly - LLDP is enabled on the port. The port can transmit LLDP
data packets.