Allied Telesis AT-WA7400 - Manual (Page 35)

AT-WA7400 Wireless Access Point Installation Guide
33
Using the Access Point on a Desktop
You can place the AT-WA7400 Wireless Access Point on a
desktop or other flat surface.
To place the AT-WA7400 Wireless Access Point on a desktop,
perform the following procedure:
1. Turn the access point over so that the top is resting on a flat
surface.
2. Attach the four rubber feet to the bottom of the access point as
shown in Figure 5.
Figure 5. Attaching the Rubber Feet
3. Turn the access point over and place it on a flat, secure surface
such as a desk or table, leaving ample space around the unit for
ventilation.
305
5V ,2 .8 A RE SE T T O D EF AU LT
LA N