Allied Telesis AT-WA7400 User Manual
Page 46
Chapter 2: Installation
44
Wait for the search to complete, or until KickStart has found
your new access points, as shown in Figure 14.
Figure 14. KickStart Search Results Page
Note
The KickStart utility only finds other AT-WA7400 Wireless
Access Points.
If KickStart does not find the AT-WA7400 Wireless Access Point
you just installed, an informational window is displayed with
troubleshooting information about your LAN and power
connections.
6. Review the list of access points that KickStart found, as shown
in the example in Figure 14.
The access points are listed with their locations, media access
control (
MAC
) addresses, and
IP address
es. If you are installing
the first access point on a single-access-point network, only one
entry is displayed on this page.