Allied Telesis AT-GS950/24 - Manual (Page 20)

Chapter 1: Overview
20
Table 4 describes the LEDs for the SFP ports.
LINK/ACT Off The port has not established a link with an
end node.
Blinking
Green The port is transmitting or receiving data.
Green A valid link has been established on the port.
Table 4. SFP Port LEDs
LED State Description
LINK/ACT Off The port has not established a link with an
end node.
Blinking
Green The port is transmitting or receiving data.
Green A valid link has been established on the port.
Table 3. 10/100/1000Base-T Port LEDs (Continued)
LED State Description