Allied Telesis AT-2812FX - Manual (Page 28)

Chapter 2: Installing the Hardware
28
5. For the 54 mm ExpressCard slot, align the module to the left side of
the slot. See Figure 7.
For laptops with the 34 mm ExpressCard slot, the module fits snugly
into the slot.
Figure 7. Inserting the Module
6. Applying even pressure at both corners of the module, push the
module until it is firmly seated in the PCI ExpressCard slot.
Caution
Do not use excessive force when seating the module, because this
may damage the system or the module. If the module resists
seating, remove it from the system, realign it, and try again.
7. Make sure the module is seated securely.
8. Power the system on.
Once the system returns to proper operation, the module hardware is
fully installed. Next, connect the network cables. See “Connecting the
Network Cables” on page 29.
1713
LINK/A
CT