Allied Telesis AT-2812FX - Manual (Page 78)

Appendix B: Cleaning Fiber Optic Connectors
78
Using a Cartridge-Type Cleaner
Fiber optic cartridge cleaners are available from many vendors and are
typically called “cartridge cleaners,” as shown in Figure 34.
Figure 34. Cartridge Cleaner
Note
Do not use compressed air or aerosol air to clean a fiber optic
connector.
To clean a fiber optic connector using a cartridge cleaner, do the following.
1. With one hand, hold the cartridge cleaner and push the lever on the
cleaning cartridge in the direction of the arrow to expose the cleaning
surface, as shown in Figure 35.
2. Place the ferrule tip on the exposed cleaning surface and rub the
ferrule in a downward direction, as shown in Figure 35.
Figure 35. Rubbing the Ferrule Tip on the Cleaning Surface
TAPE A Wip ing Dire ctio n
PUSH OPEN PUSH OPEN