Allied Telesis AT-2912T - Manual (Page 54)

Installing Windows Server 2003 and Windows XP Driver Software
54
3. In the “Hardware tab” on the System Properties dialog box, select
“Device Manager.”
The Device Manager window is shown in Figure 24 on page 50.
4. Click the “+” next to the Network Adapters folder. Then double click on
the desired Allied Telesis network adapter.
For the AT-2712FX/SC adapter, the Allied Telesis AT-2712FX 100 Mb
Fiber Ethernet Properties window is displayed. See Figure 27.
5. Click the Advanced tab.
The Advanced tab for the AT-2712FX/SC adapter is shown in
Figure 27.
Figure 27. Allied Telesis AT-2712FX 100 Mb Fiber Ethernet Properties
Window
6. From the Property list on the Advanced tab, select 802.1p QOS.
7. From the Value list on the Advanced tab, select one of the following:
 Enable - Enables the 802.1p QOS property.
 Disable - Disables the 802.1p QOS property. This is the default.