Allied Telesis AT-2912T - Manual (Page 60)

Installing Windows Server 2003 and Windows XP Driver Software
60
Note
You must have Administrator privileges to update the driver
software.
To change the speed and duplex mode of an adapter, perform the
following procedure:
1. Start either a Windows Server 2003 system or a Windows XP system
and log in.
2. On the desktop, right click My Computer and select “Properties.”
The System Properties dialog box opens, as shown in Figure 22 on
page 48.
3. In the “Hardware tab” on the System Properties dialog box, select
“Device Manager.”
The Device Manager window is shown in Figure 24 on page 50.
4. Click the “+” next to the Network Adapters folder. Then double click on
the desired Allied Telesis network adapter.
For the AT-2712FX/SC adapter, the Allied Telesis AT-2712FX 100 Mb
Fiber Ethernet Properties window is displayed. See Figure 27 on page
54.
5. Click the Advanced tab.
The Advanced tab is shown in Figure 27 on page 54.
6. From the Property list on the Advanced tab, select “Speed & Duplex.”
7. In the Value list on the Advanced tab, select one of the following:
 10 Mb Full
 10 Mb Half
 100 Mb Full
 100 Mb Half
 Auto
For the AT-2712FX/SC adapter, you can only select either the 100 Mb
Full or the 100 MB Half speeds and duplex modes.
For the AT-2912T adapter, you can select from all 5 options.
8. Click OK.