Network topologies, Power workgroup topology, Figure 3. power workgroup topology – Allied Telesis AT-FS708POE User Manual
Page 26: At-fs708/poe fast ethernet switch, Chapter 1: overview 26, Class 1 laser product
Chapter 1: Overview
26
Network Topologies
This section illustrates two network topologies that you can create with the
AT-FS708/POE Fast Ethernet switch: a power workgroup and collapsed
backbone. Both types of topologies are described below.
Power
Workgroup
Topology
The topology shown in Figure 3 is commonly referred to as a power
workgroup topology. Each workstation or end node is connected directly to
a port on the switch. Each end node has a dedicated data link to the
switch for best performance and reliability. The devices can operate at
10 Mbps or 100 Mbps.
Figure 3. Power Workgroup Topology
AT-FS708/POE
8 port 10/100TX Unmanaged POE Switch w/1 SFP port
POWER
1
2
3
4
5
6
7
8
PoE
SFP
UPLINK PORT
PD ON
PD ERR
LINK
ACT
CLASS 1
LASER PRODUCT
1000Base-X
786
Legend
10 Mbps
100 Mbps
AT-FS708/POE Fast Ethernet Switch