Allied Telesis AT-FS708POE - Manual (Page 44)

Chapter 2: Installation
44
Warning
Class 1 laser product.  L1
Warning
Do not stare into the laser beam.  L2
Note
For information about the proper cable type, refer to the
documentation that accompanied the SFP transceiver.
Note
Before you install the cable in the SFP transceiver, verify that the
optical power input to the transceiver is within its dynamic range.
1. Remove the dust cover from the SFP transceiver, as shown in
Figure 12.
Figure 12. Removing the Dust Cover from the SFP Transceiver
2. Connect the fiber optic cable to the SFP transceiver, as shown in
Figure 13.
Figure 13. Connecting Fiber Optic Cables to the SFP Transceiver
7
8
783
SFP
UPLINK PO
RT
PD O N
PD ERR
LINK
ACT
7
8
784
SFP
UPLINK PO
RT
PD O N
PD ERR
LINK
ACT