Web browser interface user’s guide overview, Intended audience – Allied Telesis AT-S94 User Manual
Page 8
Preface
Web Browser Interface User’s Guide Overview
Page 8
Page 8
Web Browser Interface User’s Guide Overview
The Web Browser Interface User’s Guide provides the following sections:
•
Section 1,“Getting Started” — Provides information for using the Embedded Web Management System,
including adding, editing, and deleting configurations.
•
Section 2, “Defining System Information” — Provides information for defining basic device information.
•
Section 3, “Configuring Internet Protocol Version 6” — Provides information for configuring IPv6.
•
Section 4, “Configuring System Time” — Provides information for configuring Daylight Savings Time and
Simple Network Time Protocol (SNTP).
•
Section 5, “Configuring Device Security” — Provides information for configuring both system and network
security, including traffic control, and switch access methods.
•
Section 6, “Configuring DHCP Snooping”— Provides information for configuring DCHP Snooping.
•
Section 7, “Configuring Ports” — Provides information for configuring ports, port aggregation, port
mirroring and LACP.
•
Section 8, “Configuring Interfaces” — Provides information for defining ports, LAGs, and VLANs.
•
Section 9, “Configuring System Logs” — Provides information for setting up and viewing system logs, and
configuring switch log servers.
•
Section 10, “Configuring Spanning Tree” — Provides information for configuring Classic, Rapid, and
Multiple Spanning Tree.
•
Section 11, “Configuring Multicast Forwarding” — Provides information for configuring both the static and
dynamic forwarding databases.
•
Section 12, “Configuring SNMP” — Provides information for configuring SNMP access and management.
•
Section 13, “Configuring Power Over Ethernet” — Provides information for configuring Power over
Ethernet (PoE) on the device.
•
Section 14, “Configuring Services” — Provides information for configuring Quality of Service CoS
parameters.
•
Section 15, “System Utilities” — Provides information for managing system files.
•
Section 16, “Viewing Statistics” — Provides information about viewing device statistics, including Remote
Monitoring On Network (RMON) statistics, and device history events.
•
Section 17, “Managing Stacking” — Provides information for stacking, including a stacking overview.
•
Appendix A, “Downloading Software with CLI” — Provides information for downloading device software
through the command line interface.
•
Appendix B, “System Defaults”— Provides the device defaults.
Intended Audience
This guide is intended for network administrators familiar with IT concepts and terminology.