Show mgmtacl – Allied Telesis AT-S63 User Manual
Page 728
Chapter 44: Management ACL Commands
728
Section IX: Management Security
SHOW MGMTACL
Syntax
show mgmtacl [id=
value
]
Parameters
id
Specifies the ID number of an ACE to view.
Description
This command displays the state of the Management ACL and ACL
entries. Figure 62 is an example of the information displayed by this
command.
Figure 62. SHOW MGMTACL Command with ENTRIES Option
For an explanation of the parameters, refer to “CREATE MGMTACL” on
page 721.
Examples
The following command displays the status of all the ACEs in the
Management ACL:
show mgmtacl
The following command displays the details of just ACE ID 14:
show mgmtacl id=14
Management ACL Status ......................... Disable
ID
IP Address
Mask
Application
----------------------------------------------------------
1
149.44.44.44
255.255.255.255
TELNET
2
149.55.55.0
255.255.255.0
ALL