Allied Telesis AT-GS900/24 - Manual (Page 29)

AT-GS900/16, AT-GS900/24 Fanless Gigabit Ethernet Switches Installation Guide
29
Installing the Switch on a Wall
To install the switch on a wall, perform the following procedure:
1. Remove all the items from the packaging and store the packaging
material in a safe place. In the event a problem occurs and you need to
return the unit, please use as much of the original shipping material as
possible.
2. Attach the two rackmounting brackets (provided) to the sides of the
switch using the eight flathead Phillips screws (provided), as illustrated
in Figure 7.
Figure 7. Attaching the brackets to the sides of the switch
1302