Allied Telesis AlliedView-EMS 3.10 VLAN MANAGER - Manual (Page 23)

5.2.1.2 Adding/Removing Ports
You can add ports to or remove ports from a VLAN definition by clicking on the port
images on the device panel. Refer to Section 4.2 - Device Panel for details on how to specify
tagged and untagged ports, uplink untagged and uplink tagged ports, private untagged and
private tagged ports, core and customer ports and to unselect ports.
Adding/Removing Ports
In the illustration above, a new VLAN definition is being created for a Rapier 24i. The VLAN
Name
is "test" while its Identifier is "3". Ports 2 to 6 are untagged members while Port 1 is a
tagged member of the VLAN.
5.2.1.3 OK Button
The OK Button is disabled by default. It is only enabled when both the Name and Identifier
fields are populated. When the OK button is clicked, VLAN Manager adds the new VLAN
definition to the target host and updates the VLAN Information Window.
AlliedView™-EMS 3.10 VLAN Manager User’s Guide Page 23 of 71