Allied Telesis AT-S86 - Manual (Page 146)

Chapter 14: Downloading New Management Software
146
Downloading New Management Software
To download a new version of the AT-S86 management software, perform
the following procedure:
1. From the main menu, select System > Firmware Upgrade.
The Firmware Upgrade page is shown in Figure 49.
Figure 49. Firmware Upgrade Page
The page shows the hardware (switch) version, and the boot ROM and
firmware versions currently running on the switch.
2. In the Firmware field, enter the name of firmware file you want to
upload to the switch, or click Browse to locate the file.
Note
After the firmware upload is complete, the switch is automatically
rebooted and you lose your connection to the switch. You will need
to log in again.
3. Click Upload.
Note
The reboot process that occurs after the new firmware is uploaded
will stop network traffic.