Allied Telesis AT-S88 - Manual (Page 126)

Chapter 12: Security
118
Setting Up a Dial-In User
You should set up a dial-in user account for each person who needs to
access the switch for management purposes.
Adding a Dial-in
User
To set up a user’s dial-in access, perform the following procedure:
1. From the main menu, select Security > Dial-in User.
The Dial-in User page is shown in Figure 38.
Figure 38. Dial-In User Page
2. In the User Name field, type a name for the user.
3. In the Password field, type a password for the user, and re-type the
name in the Confirm Password field.
4. In the Dynamic VLAN field, enter the name of the VLAN which you will
allow the user to access.
5. Click Add.
6. Do one of the following:
ˆ Click OK to save the changes.
ˆ Click Reload to clear the changes and start over.
7. To permanently save these settings in the configuration file, from the
main menu, select Save Configuration.