Allied Telesis AT-S88 - Manual (Page 62)

Chapter 6: Port Trunking
54
Creating a Port Trunk
To create a port trunk, perform the following procedure:
1. From the main menu, select Bridge > Trunking.
The Trunking page is shown in Figure 17.
Figure 17. Trunking Page
2. In the Show Trunk list, select Add a New Trunk.
3. In the Name field, type a name for the trunk.
4. In the Trunk ID field, choose a number for the trunk ID, from 1 to 10.
5. Select the ports you want to include in the trunk by clicking the port
icon in the graphic image of the switch front.
A check mark is placed for each port you select, as for example
Figure 18.
Figure 18. Trunk Ports Selected
You can select up to a maximum of 8 ports for each trunk which must
all be within the same VLAN.