Allied Telesis AT-CV5000 - Manual (Page 89)

AT-CV5000 Media Converter Chassis Installation Guide
89
Figure 65. Tightening the Screws on the AT-CVFAN Module in Slot B
To power on the chassis, proceed to the procedure described in
“Powering On an AC Powered Chassis” on page 60 or “Powering On a
DC Powered Chassis” on page 64.
When the connection is established, the appropriate fan LED (FAN-A
or FAN-B) on the LED interface card should be green. If the LED is
OFF, refer to “Troubleshooting” on page 95 for instructions.
AT-PWR14
R
AT-CV5PWRA
C
A
B
100 -240 VAC ~
5F
AN
A
POW ER
FAUL T
A T -CVF
AN
B
100 -240 VAC ~
WA RNING This unit mig ht h ave m ore than one pow er in put. To
redu ce th e ris k of elec tric s hoc k, dis con nect all p owe r