Allied Telesis AT-2972T/2 - Manual (Page 125)

AT-29xx Series Gigabit Ethernet Adapters Installation Guide
125
DOS Prompt Commands
Table 9 lists the DOS prompt commands.
Table 9. DOS Prompt Commands
Command Description
-c <num> Specify adapter to be tested and/or
modified
-cmd Enter command mode
-w <value> Enable/Disable (value = 1/0) WOL in
manufacture mode
-mba <value> Option to select MBA protocol
0 = Disable
1 = Enable
-mbap <value> Option to select MBA protocol
0 = PXE
1 = RPL
2 = BOOTP
-mbas <value> Option to select MBA speed
0 = auto
1 = 10HD
2 = 10FD
3 = 100HD
4 = 100FD
6 = 1000FD (fiber)
-firm <file name> Update devices eeprom based on <file
name> image match to HW
-ver Version of the current software/
eeprom.bin
-pxe <file name> Programming PXE firmware from file
-elog <file name> Output error to log file