Allied Telesis AT-FS705PD User Manual
Page 33
AT-FS705PD Fast Ethernet Switch Installation Guide
25
Table 5 lists the RJ-45 connector pins and their signals used in Port 5 when
this port is connected to a PSE device using a straight cable.
Table 5 Port 5 RJ-45 Pin Signals (using straight cable)
PSE PWR
Configuration
Alternative A
(MDI)
PSE side
Alternative A
(MDI-X)
PSE side
Alternative A
(MDI)
PSE side
Alternative A
(MDI-X)
PSE side
Pin Number
Port 5 Signals (*)
1
RX+ and
Vport-1
TX+ and
Vport-1
RX+
TX+
2
RX- and
Vport-1
TX- and
Vport-1
RX-
TX-
3
TX+ and
Vport-2
RX+ and
Vport-2
TX+
RX+
4
-
-
Vport+
Vport+
5
-
-
Vport+
Vport+
6
TX- and
Vport-2
RX- and
Vport-2
TX-
RX-
7
-
-
Vport-
Vport-
8
-
-
Vport-
Vport-
(*) Vport-1 can be either Vport + or Vport-, depending on the PSE device.
Vport-2 can be either Vport+ or Vport-, depending on the PSE device.
If Vport-1 = Vport +, then Vport-2 = Vport-, and if Vport-1 = Vport -, then Vport-2 = Vport+.